Automation

Our product range includes a wide range of 2.8inch tft lcd module, md0630t01a-2 ac dc earth leakage detector sensor and brushless direct current motor.

2.8Inch TFT LCD Module

Product Price: Rs 418 / PieceGet Best Price

Product Brochure

Product Details:

Resolution	240 x 320
Module Size	50.0 x 69.2 x 3.2
Size	2.8"
Power Supply	3.3 V
Model No.	LT028A-01A

Model No.	LT028A-01A	LT028A-01AT
Resolution	240 x 320	240 x 320
Module size(W x H x T)	50.0 x 69.2 x 3.2	50.0 x 69.2 x 4.3
Size(Inch)	2.8"	2.8"
Active Area(W x H)	43.2 x 57.6	43.2 x 57.6
Font ROM	None	None
Touch Panel	None	RTP
Power Supply	3.3V	3.3V
Interface Mode	8/16-bit MCU	8/16-bit MCU
Connection type	37P FPC Solding	37P FPC Solding
Controller	ST7789V2	ST7789V2

Get Best QuoteRequest A Callback

MD0630T01A-2 AC DC Earth Leakage Detector Sensor

Get Latest Price

Product Details:

Three outputs	DC alarm, AC alarm, AC/DC alarm
Part Number	MD0630T01A-2
Wide voltage input	12V+-20%
Measuring current range:	DC current 2-15mA; AC current 3-100mA

INTRODUCTION :-

MD0630T01A-2 is an automotive grade smallest leakage current sensor designed for portable charger also called residual current monitoring (RCM), residual current detection (RCD), differential current sensor, leakage current detector and fault current sensor. Type A, B and B+, dedicated to detect to DC, AC and DC+AC leakage current measurement. The internal parts of the portable charger should be as small as possible, our new leakage detector is small and lightweight, which just meets this requirement. This residual current monitor will detect DC and AC residual currents in 50Hz/60Hz AC installations according to IEC62955. It's primarily intended for use in Electric Vehicle charging stations to disconnect the supply to the Electric Vehicle under a DC residual fault current condition. It will protect against DC (6mA) and AC (30mA) residual currents, and will signal to the Smart EVSE if a fault occurs.

Product Advantages :-

Ultra-small, Flexible, Integration Design, Residual current range 2~100 mA
Switching output for 6 mA DC/30 mA (IEC) or 5 mA /20 mA (UL 2231)
Error(Fault) output (Integrated self-monitoring and test functions)
Digital Output, Measurement resolution DC 0.2 mA AC 0.3mA
Full load current up to 200A (1-phase) or 150A (3-phase)
AC DC Leakage Data Readable; Alarm Value Programmable; 3 Way Alarm Outputs
Robust mechanical design suitable for harsh electronic environments
Total system cost significantly reduced compared to type B RCCB
URAT Comm. with Modbus Protocol; Standard: EN 61000-6-3:2007+A1 ,EN IEC 61000-6-1:2019